Product Description
Single Row Crossed Cylindrical Roller 62HRC Slewing Ring Bearing
Product Description
The supporting wheel is the key to the normal operation of rotary kiln. Kiln bearing babbitt alloy, bear all the load of the machine, so good lubrication on the bearing life has a great relationship, it directly affects the service life of the machine and the rate of operation, so the requirements of the injection of lubricating oil must be clean, sealing must be good. Lack of lubrication will cause the bearings to burn out due to excessive temperature.
Our 4 point contact ball rotary bearings consist of 2 seat rings. In this rotary bearing, the ball contacts the circular raceway at 4 points. The bearing can bear axial force, radial force and synthetic moment simultaneously. Double row ball 4 point contact rotary bearings of different diameters our double row ball 4 point contact rotary bearings of different diameters are turntable bearings designed with 3 seat rings. Steel ball and isolation block can be arranged between inner raceway and outer raceway. According to the bearing capacity, the diameter of steel balls in the upper and lower rows is different. Three row cylindrical roller combined slewing bearing is a professional manufacturer of 3 row cylindrical roller combined slewing bearing in China, we mainly provide 3 row cylindrical roller combined slewing bearing with internal gear, 3 row cylindrical roller combined slewing bearing with external gear and 3 row cylindrical roller combined slewing bearing with gear. Light load rotary bearings our 4 point contact ball rotary bearing flanges are reliable for performance and low price
Product Parameters
| Type |
Single row 4 point contact ball slewing bearing Double row crossed cylindrical roller slewing bearings Double row ball slewing bearings Wind power bearings Non-standard customized slewing bearing with inner/ outer gear |
| Rollng elements | Steel ball / Cylinder Roller |
| Bearing Material | 50Mn/42CrMo/42CrMo4V /Customized |
| Cage Material | Nylon/ steel /copper |
| Structure | taper pin, Mounting holes, Inner ring, grease fitting, load plug, seals, roller, spacer balls or separators |
| Outer diameter | 50-10000mm |
| Bore size | 50-10000mm |
| Mounting hole | Through hole/Tapped hole |
| Raceway hardness | 55-62HRC |
| Inner and outer ring modulation hardness |
229-269HB/Customized |
| Gear type | No gear, Internal gear, External gear |
| Certificate | SGS, ISO9001 |
|
Application area |
Ladle turret, Stacker crane, Bucket wheel machine, Solar heliostat Tracking System, port crane, Cabling machine, tower crane, offshore platform, ferris wheel, Palletizing robot, Rotary metallurgical furnace, can packing machine, Wind blade transporter, shield tunneling machine, tube push bench, excavator |
Certifications
Company Profile
FAQ
Q: Why we believe in HangZhou CHINAMFG industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: 1 year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
After Sales Service
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES – DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC’s Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Nonstandard |
|---|---|
| Feature: | Heat-Resistant |
| Application: | Conveyer Equipment, Marine, Mining Equipment, Agricultural Machinery |
| Surface Treatment: | Oil Blooming |
| Material: | Carbon Steel |
| Seals Type: | Rubber Seal and Labyrinth Seal |
| Customization: |
Available
|
|
|---|
What is a slewing ring, and how is it used in mechanical systems?
A slewing ring, also known as a slewing bearing or turntable bearing, is a specialized type of rolling element bearing that enables rotational movement between two components. It consists of an inner ring, an outer ring, rolling elements (such as balls or rollers), and often a gear mechanism. Slewing rings are used in mechanical systems where there is a need for smooth and controlled rotation. Here’s a detailed explanation of what a slewing ring is and how it is used:
- Structure and Components: A slewing ring typically has a large diameter compared to its thickness, allowing it to support axial, radial, and moment loads. The inner and outer rings have raceways that the rolling elements move along. The rolling elements, which can be balls or rollers, distribute the load and facilitate smooth rotation. In some cases, a gear mechanism is integrated into the slewing ring, allowing it to act as a rotational drive system.
- Rotational Movement: The primary function of a slewing ring is to enable rotational movement between two components. It provides a stable and low-friction interface that allows one component to rotate relative to the other. The rolling elements within the raceways minimize friction and distribute the load evenly, resulting in smooth and controlled rotation. Slewing rings can support both continuous rotation and intermittent or oscillating movement, depending on the application requirements.
- Load Support: Slewing rings are designed to support various types of loads. They can handle axial loads, which are forces acting parallel to the axis of rotation, as well as radial loads, which are forces acting perpendicular to the axis of rotation. Additionally, slewing rings can accommodate moment loads, which are a combination of axial and radial loads that create bending or twisting forces. The load-carrying capacity of a slewing ring depends on factors such as its size, design, and choice of rolling elements.
- Applications: Slewing rings find applications in a wide range of mechanical systems across different industries. Some common uses include:
- Construction and Cranes: Slewing rings are extensively used in construction machinery, cranes, and mobile equipment. They enable 360-degree rotation of the boom or jib, allowing for efficient material handling and positioning.
- Wind Turbines: Slewing rings are crucial components in wind turbine systems. They support the rotor, allowing it to rotate according to wind direction, and provide a connection between the rotor and the nacelle, enabling yaw movement.
- Industrial Equipment: Slewing rings are utilized in various industrial equipment, including indexing tables, turntables, robotic arms, and packaging machinery. They facilitate precise and controlled rotation in these applications.
- Transportation and Automotive: Slewing rings are employed in transportation and automotive applications, such as vehicle cranes, aerial platforms, and rotating platforms for heavy-duty vehicles. They enable safe and smooth rotation in these specialized systems.
- Medical and Rehabilitation Equipment: Slewing rings are used in medical and rehabilitation equipment, such as patient lifts and adjustable beds. They allow for smooth and controlled movement, aiding in patient care and mobility assistance.
In summary, a slewing ring is a specialized bearing that enables controlled rotational movement between components in mechanical systems. Its ability to support various loads, provide smooth rotation, and accommodate different applications makes it a valuable component in a wide range of industries.
Can you provide insights into the importance of proper installation and alignment of slewing rings?
Proper installation and alignment of slewing rings are of utmost importance for ensuring optimal performance, longevity, and safety of rotating systems. Here’s a detailed explanation of the importance of proper installation and alignment of slewing rings:
- Load Distribution: Correct installation and alignment of slewing rings ensure proper load distribution across the rolling elements and raceways. When a slewing ring is improperly installed or misaligned, excessive loads may be concentrated on specific areas, leading to accelerated wear, premature failure, and reduced load-bearing capacity. Proper alignment helps distribute loads evenly, maximizing the life expectancy of the slewing ring.
- Smooth Operation: Accurate installation and alignment contribute to the smooth operation of rotating systems. Misalignment can result in increased friction, uneven motion, vibrations, and noise. These issues not only reduce efficiency but also impact the overall performance and reliability of the system. Proper alignment minimizes friction and ensures smooth and precise rotational movement, enhancing the system’s efficiency and productivity.
- Reduced Wear and Tear: Improper installation or misalignment can cause excessive wear and tear on the slewing ring and associated components. Misalignment can lead to increased rolling element and raceway stresses, resulting in accelerated fatigue and surface damage. By achieving proper alignment, the slewing ring operates within its designed parameters, reducing wear and extending its operational life.
- Optimized Performance: Proper installation and alignment directly impact the performance of rotating systems. Accurate alignment ensures that components such as gears, motors, and drive systems mesh correctly with the slewing ring. This alignment facilitates efficient power transmission, reduces energy losses, and improves the overall performance and responsiveness of the system.
- Prevention of Structural Damage: Misalignment of slewing rings can exert excessive forces on the supporting structure or adjacent components. Over time, these forces can cause structural damage, misalignment in other parts of the system, or even equipment failure. Proper installation and alignment help prevent such structural damage, ensuring the integrity and longevity of the entire system.
- Safety Considerations: Correct installation and alignment of slewing rings are crucial for safety in rotating systems. Misalignment can lead to unexpected movements, uncontrolled motion, or component failure, posing a risk to personnel, equipment, and the surrounding environment. Proper alignment reduces the likelihood of accidents, improves operational safety, and ensures compliance with safety regulations.
- Ease of Maintenance: Properly aligned slewing rings are easier to maintain and service. Routine maintenance tasks such as lubrication, inspection, and replacement of components can be performed more efficiently when the slewing ring is correctly installed and aligned. This reduces downtime, extends maintenance intervals, and improves the overall operational efficiency of the system.
In summary, proper installation and alignment of slewing rings are critical for achieving optimal performance, reliability, and safety in rotating systems. Accurate alignment ensures load distribution, smooth operation, reduced wear, optimized performance, prevention of structural damage, enhanced safety, and ease of maintenance. It is essential to follow manufacturer guidelines, industry standards, and best practices to ensure the correct installation and alignment of slewing rings, maximizing their operational lifespan and the efficiency of the entire system.
How do electronic or computer-controlled components integrate with slewing rings in modern applications?
In modern applications, electronic or computer-controlled components are often integrated with slewing rings to enhance functionality, precision, and automation. This integration allows for advanced control, monitoring, and optimization of rotating systems. Here’s a detailed explanation of how electronic or computer-controlled components integrate with slewing rings in modern applications:
- Sensor Integration: Electronic sensors can be integrated with slewing rings to provide real-time feedback and data on various parameters. For example, position sensors can be used to accurately track the position and angle of the slewing ring, enabling precise control and positioning of the rotating components. Load sensors can measure the load applied to the slewing ring, allowing for dynamic load monitoring and optimization.
- Control Systems: Computer-controlled components, such as programmable logic controllers (PLCs) or microcontrollers, can be used to manage the operation of slewing rings. These control systems can receive input from sensors and execute algorithms to control the speed, direction, and positioning of the slewing ring. By integrating electronic control systems, precise and automated control of the slewing ring can be achieved, improving efficiency and reducing human error.
- Automation and Synchronization: In modern applications, slewing rings are often integrated into automated systems where they work in synchronization with other components. Electronic or computer-controlled components can facilitate this synchronization by coordinating the movements of multiple slewing rings or integrating them with other automated processes. This integration enables seamless and optimized operation of the rotating system as a whole.
- Data Monitoring and Analysis: Electronic components can be used to collect and analyze data from slewing rings. This data can include parameters such as position, speed, temperature, and load. By monitoring and analyzing this data, it is possible to identify patterns, detect anomalies, and optimize the performance of the slewing rings. This information can be used for predictive maintenance, energy optimization, and performance improvement.
- Communication and Networking: Electronic components enable communication and networking capabilities for slewing rings. They can be connected to a network or interface with other control systems, allowing for remote monitoring, control, and integration into larger systems. This enables centralized monitoring and control of multiple rotating systems, facilitating efficient operation and maintenance.
- Feedback and Safety Systems: Electronic components can provide feedback and safety features in slewing ring applications. For example, limit switches or proximity sensors can detect the end positions of the slewing ring’s rotation and trigger safety mechanisms or control actions accordingly. This ensures safe operation, prevents over-rotation, and protects the equipment and personnel.
By integrating electronic or computer-controlled components with slewing rings, modern applications can achieve enhanced control, precision, automation, and data-driven optimization. This integration allows for efficient operation, improved safety, accurate positioning, synchronization with other systems, and the ability to adapt to changing operational requirements. It paves the way for advanced technologies such as robotics, Internet of Things (IoT), and Industry 4.0, where slewing rings play a vital role in the seamless integration of mechanical and electronic systems.
editor by CX 2024-03-27